欢迎来到洛阳星利达热力设备有限公司 联系我们 | 在线留言 | 网站地图
销售热线:18637901191(丁经理)

热门搜索: 翅片管 不锈钢翅片管 翅片管式换热器 电力除渣设备 电力给煤设备

新闻中心当前位置:翅片管官网主页 > 新闻中心

翅片管性能介绍

发布时间:2019-03-20 作者:洛阳星利达热力设备有限公司

翅片管作为换热元件,长期工作于高温烟气的工况下,比如锅炉换热器用翅片管使用环境恶劣,高温高压且处于腐蚀性气氛,这要求翅片管应具有很高的性能指标。

As a heat exchange component, the finned tube works for a long time under high temperature flue gas conditions. For example, the fin tube of the boiler heat exchanger has a harsh environment, high temperature and high pressure and is in a corrosive atmosphere, which requires high performance of the finned tube


不锈钢翅片管产品图展示.jpg

 防腐性能(Anti-corrosion)


 耐磨性能(Anti-wear)


 低的接触热阻(lower contact resistance)


 高的稳定性(Higher Stability)


 防积灰能力

 Anti-corrosion


 Wear resistance (Anti-wear)


 Low contact resistance


 High Stability


 Anti-ashing ability


套装翅片


套装翅片工艺是预先用冲床加工出一批单个的翅片,然后用人工或机械方法,按一定的距高(翅距),靠过盈将翅片套装在管子外表面上。它是应用***早的一种加工翅片管的方法。由于套装工艺简单,技术要求不高,所用设备价格低廉,又易于维修,所以,至今仍有不少工厂在采用。此工艺是一种劳动密集型工艺方案,适合于一般小厂或乡镇企业的资金和技术条件。

The set fin process is to pre-process a batch of individual fins by punching, and then manually or mechanically, according to a certain height (wing distance), the fins are placed on the outer surface of the tube by interference. It is the earliest method of processing finned tubes. Due to the simple process and low technical requirements, the equipment used is inexpensive and easy to maintain, so many factories are still in use. This process is a labor-intensive process solution that is suitable for the capital and technical conditions of small or medium-sized enterprises.


用人工方法套装的称为手工套装。它是借助工具,依靠人的力量将翅片一个个压入的。这种方法因为翅片的压入力有限,故套装的过盈量小,翅片容易产生松动现象。

The manual method is called a manual suit. It uses tools to rely on human strength to push the fins one by one. In this method, since the pressing force of the fin is limited, the interference of the set is small, and the fin is prone to looseness.


  • 上一篇:翅片管换热器结霜的特点及危害分析
  • 下一篇:没有了
  • 版权所有:洛阳星利达热力设备有限公司 备案号:豫ICP备19005217号-1  技术支持:青峰网络

    洛阳星利达热力设备有限公司是一家专注于生产销售:翅片管不锈钢翅片管翅片管式换热器燃气炉专用翅片管等换热元件的翅片管厂家。